Copyright 2013, Ron Minor

NOTE - No part of this blog or the link to it maybe cross posted without the permission of the blog writer!!

Copyright 2013, Ron Minor

Tuesday, March 05, 2013

A couple of days along the BNSF Creston Sub

I was able to spend some time on Saturday and Sunday along the BNSF Creston sub in Lincoln and Ashland, NE. Its been awhile since I've spent anytime in that area and it was good to see something other than dirty yellow GE's.

Saturday March 2nd.

BNSF 8970 starts to head into the Lincoln yard.
As is typical, the closer one gets to Lincoln the more common it is to see trains backed up waiting for a spot in the yard. Taking the I-80 off ramp into Waverly, NE two coal empties were seen waiting for a slot in the yard.First in line was a empty KC Power and Light with BNSF 8970-5807 and DPU 9688 as power. Behind it was another empty coaler with a mixed bag of private reporting marks on the cars. Power was BNSF 9229-5895-9148 and no DPU.
BNSF 9229 leads mixed bag of empty coal hoppers into Lincoln, NE.
Both coalers needed to clear the main in order for a couple of loaded coalers to head east. While waiting for these movements to start the MLINLIN pulled up through Waverly and held on the west side of town.
The MLINLIN holds the main west of Waverly, NE.
The first of the eastbounds to head out was a Mid-America coaler for Council Bluffs, IA. Power was BNSF 6136-9964 and no DPU. The second train was being moved from the yard to Pacific Jct., IA. Instructions for it where to tied down in the old yard after backing down the east side of the wye to the Napier Sub. I wasn't able to get the power numbers as it passed on the opposite side of the BNSF 9229 in Havelock, NE.

After the brief stop on the east side of the Havelock shops, I headed over to the old depot area to take a look at the local power that is typically tied down there. BNSF 3171 and 8613 were noted as the local switch units which is a far cry from the days when they ran the Transcon full out.

BNSF 3171 and 8613 are the Havelock local switch engines.
Next stop was the area on the east end of the yard where the St. Joe, Creston, and Hastings subs all come together. This area is now no mans land as the BNSF had the city close J st. through the wye over to S 1st st. There are a couple of locations to park near the grade crossing at S 1st st, but since one of them is a private business there is no guarantee that one can park there for long.

While getting parked I noticed a set of lite power on the east end of the yard and was hoping they would come out a little bit closer to the road as the lead unit was BNSF 769 which still wears its red and silver BNSF scheme. She had the BNSF 4300 and a unknown CSX C40-8W trailing.

With no more eastbounds lined up to leave the yard the last train for me was another empty coaler with BNSF 9231 and DPU BNSF 9818.

BNSF 9231 curves under the signal bridge on the east side of the  Lincoln NE yard.
Sunday March 3rd.
Sunday started out with hazy sunny skies but soon turned to clouds. Since the sun was shinning I took off for Ashland, NE hoping to get a fair amount of traffic before having to head back home at noon.

BNSF 9693 leads an empty coaler through Ashland, NE.
Soon after getting parked the scanner started chirping letting me know an EOT was somewhere close. Within a couple of minutes an empty coaler came around the curve on the far east side of Ashland. BNSF 9693-6220 and DPU 6273 roared by in some nice light. The signal just to the west of where I was parked soon returned to yellow and then flashing yellow as another westbound approached. Today's MLINLIN came into view with the same units (BNSF 9161-6102) as the day before plus the BNSF 521 that they picked up in Omaha, NE..

BNSF 9161-6102-521 on the MLINLIN.

Video of the MLINLIN


Next up was another empty coaler setup as a 1x1 train. BNSF 6067 lead with BNSF 9955 as the DPU.


Another empty coaler was following pretty close behind. BNSF 6191-8851-9699 headed to Lincoln on the heals of the BNSF 9955. The yard must have been pretty fluid that morning to have empties this following close together.

After the EOT passed traffic died down on the Creston sub. A southbound on the Sioux City Sub toned out the DS for permission enter the Creston Sub. About 15 minutes after the radio exchanges a southbound loaded ethanol train slowly crossed the Salt Creek bridge and took the west leg of the wye to head for Lincoln. BNSF 4346-5281 and DPU 1078 where the power for the train.


Soon after the ETOH train cleared the Sioux City sub the DS was giving track and time to the track inspector on the Sioux City sub and another track inspector was heading east on the Creston sub. Seeing as the DS only lets the inspectors out when there is a lull in traffic, I took this as a clue to head for home.

Monday, January 14, 2013

A look at the BNSF Sioux City Sub

The Sioux City sub is one of those often over looked Midwestern lines when compared to the close by BNSF Creston and Ravenna Subs and the UP's Chicago to North Platte mainline. This is rather unfortunate as this increasingly busier line has some unique character that the busier mainlines seem to lack.

History
Before beginning the exploration of this line some history is in order. The Sioux City sub was a rather late comer in eastern Nebraska. Construction of this line did not occur until 1905 when the Great Northern Railway extended the Sioux City and Western Railway to Ashland, NE from Dakota City, NE. The extension was needed to connect the CB&Q leased Sioux City and Western Railway from Ferry, NE to O'Neil, NE line. Once the line was completed the CB&Q leased what is now the Sioux City sub from the Great Northern. In 1907 the Great Northern began a process of consolidating subsidiary lines into the great Northern and in 1909 the Sioux City & Western was sold to The CB&Q.

The original route of the Sioux City Sub between Ferry, NE and Sioux City, IA was via the Pacific Short Line bridge (later known as the Combination bridge) where access to the Great Northern passenger station and freight houses along 3rd Street in Sioux City was gained.
Pacific Short Line bridge looking toward Iowa sometime in the 1890's.
Today
The BNSF Sioux City sub is a dramatically different line than it was in the early 20th century. Gone are its days of serving as a feeder line for the mainline at Ashland to its important role as a shortcut between the upper midwest and the south. Oil, sand, grain, ethanol and over head freight form the back bone of the traffic from the Dakotas and Minnesota all funneling down this non-signaled single track line. Between 14-20 trains a day play leap frog from siding to siding along this 100+ miles using TWC and creative dispatching. Some changes are in the wings for this busy line as PTC will be cut in sometime during 2013, dispatcher controlled power switches are being put into place and segments of double track are slowly being built.

Exploring the Line
Beginning from Ashland, NE heading north the various areas of the line will be outlined. The map below pinpoints specific locations and items along the line. Clicking a pin will open a pop-up with a narrative of that point of interest.


View BNSF Sioux City Sub in a larger map

Ashland to Fremont NE
Ashland NE is where the Sioux City Sub joins the Creston Sub. A wye at this junction allows for trains to head east or west on the Creston Sub. A unique feature of this junction is the presence of the Omaha Sub's junction with the Creston sub occurring between the two legs of the wye. 


An empty grain train begins its north bound journey up the Sioux City sub in Ashland NE.
Heading north from Ashland the first siding encountered will be the gravel pits owned by Western Sand and Gravel at Able and Big Sandy. These pits were once the property of Nebco and was home of the Omaha Lincoln and Beatrice inter plant railroad. Today the old OL&B line is used to store coal and freight cars.

The first town encountered north of Ashland is Yutan, NE. Yutan hosts a 4168' siding along with the at grade crossing of the UP Lincoln Sub. This crossing is protected by an automatic interlocking protecting the one M-F UP train  from Valley to Valprasio, NE.

7.5 lines north of the UP crossing is the first of the 5 important sidings along this 108 mile sub. The siding  known as Elk  is 7811' long and is used to stage trains across the UP crossing in Fremont along with south bounds meeting north bounds.

Having just meet a north bound at Elk siding this empty coaler heads for Ashland.
From the north siding switch to the UP crossing in Fremont it is 6.2 miles. About midway the sub crosses the Platte river on a plate girder bridge. From the river crossing it is around a mile and a half to the south switch to the old Fremont, NE siding. This siding is no longer used for meets and primarily serves as a storage track and to gain access to the spur into the Hormel plant at the north end of the siding.

Rounding the curve to briefly head west to the UP crossing.
After following a generally straight north alignment the line curves to the west to parallel the UP a block to the south through Fremont. Within this curve a spur heads south along the main to serve the cold storage plant across from the Homel processing plant. Both Hormel and this cold storage plant ship by rail. Refers of pork products and tank cars with tallow are the shipped out.

East of S. Main st in Fremont is the last remaining depot on the Sioux City sub. The MOW department uses the depot as offices and storage. On the west side of S. Main st the old Fremont yard is located. Interchange with the UP is done here. The Fremont to Ashland local and the Fremont to Oakland local cars are swapped on the tracks that remain.

A loaded grain train beats the UP crossing on its way south.
West of S. Main st at the north end of N. Morrell st is the BNSF-UP diamonds. BNSF trains are the lower priority at this crossing and will often wait extended periods of time before being allowed to cross the UP. BNSF crews contact the UP dispatcher for permission to cross. Once given authority they will hustle from S. Fremont or Papa to get across. Any delays typically results in the BNSF trains being "bumped" and there authority removed until the next window opens up.

A northbound loaded cement train holds the siding at Papa.
From the UP crossing it is about 2 miles to the south siding switch at Papa. Like Elk, Papa siding plays an important role in getting trains through the Fremont area, unlike Elk, Papa has industrial spurs to active customers. Five customers receive and originate loads in the area just to the south of Papa siding. Ashland Cement, Farmers Coop, Interstate Chemical, Nutri-Flow and BioEnzyme are served along the spur. At the north end of Papa siding another spur heads to CFI Industries were tank cars are unloaded.

Fremont to Oakland
Heading north out of Fremont the sub follows the Elkhorn River valley crossing it north of Winslow, NE. From this location it follows Logan Creek north through Oakland, NE.

6.9 miles northeast of Papa siding the sub crosses the FEVR's ex-CNW line at grade. This crossing is protected by an automatic interlocking but with the loss of the Diner train it is rare that an FEVR train will be encountered at this crossing.

From the FEVR crossing it is 2.5 miles to Nickerson, NE and then 5.6 miles to Winslow. Winslow used to have a small passing siding but it is now stub ended on the south end before crossing Hwy 77.

The next siding north from Winslow is a new siding that was built late 2011 south of Uehling, NE. This siding was to be the start of a segment of double tracking on the sub. It will eventually tie into the Oakland, NE siding. The distance between the two sidings is approximately 9 miles.and would give the BNSF some more room to hold trains while waiting for authority to cross the UP in Fremont. The siding at Oakland is 7420' feet but does have a crossing that can not be blocked when used.
A BN Lincoln to Sioux City train is crossing the flat farm land south of Oakland NE  during the summer of 1984.
Oakland to Winnebago
After leaving Oakland a grain shuttle loader is encountered about 1 mile from the north switch Oakland siding. This loader is setup to allow access from the north and south, but will not allow a loaded train to reverse its movement without the power running around the train. The shuttle loader is also the only customer along the sub until Dakota City, NE. This is a rather dramatic change from the 80's when every town would ship and receive cars.
An empty grain train is waiting for a fresh crew to load at the Oakland shuttle loader..
Lyons is the next town encountered from Oakland. At Lyons the sub takes a slight jog to the northwest to stay in the Logan creek flood plain which it follows until Rosalie, NE. At Rosalie the sub climbs out of the Logan Creek flood plain to the South Omaha Creek flood plain. This is a short climb of around 0.5%.

The sub follows the creek down into Walthill where an old passing siding was located.The siding is now stub ended and used for MOW storage. Just north of this siding is a hi-wide detector that protects the Gordon Drive Viaduct in Sioux City from any shifted loads or loads higher than 19'2". This high restriction prevents double stack and M3E auto racks from using the Sioux City Sub.

A southbound local running at track speed.
The next siding is at Winnebago, NE at 7590' it is the second longest siding on the sub.The Winnebago siding provides a staging spot for trains coming into the Sioux City terminal. Inbound crews will call into the Sioux City yard master asking for "landing" instructions and are typically told to call back when crossing the Missouri River bridge.

Winnebago to Sioux City
It is 27 miles from Winnebago to the terminal in Sioux City. These 27 miles can tend to be the busiest of the sub. 6.3 miles north of Winnebago is the town of Homer, NE. The old siding is still in place but has been stub ended on the south end. There does not appear to be any active shippers on this spur anymore.

It is 7.3 miles to Dakota City from Homer. In these 7.3 miles the sub crosses the Missouri River flood plain and its many old channels. There are numerous soft spots that have been shored up by driving pilings into the row on both side of the track structure. These soft spots are more pronounced during wet years as the tracks tend to sink back into the gumbo.

At Dakota City the first customer since Oakland is encountered. Elementis LTP receives inbound tank cars of chemicals that are trans loaded into tankers. A block north of them is the division point between the Twin Cities and Nebraska Divisions.The sign announcing this is a nice backdrop when out photographing.
A southbound BN grain train passes from the Minnesota Diviosion at Dakota City NE during the mid-80's.

A southbound grain train passes from the Twin Cities to the Nebraska Division.

After crossing into the Twin Cities division the sub passes through the large Tyson beef slaughter and processing plant in Dakota City. On the north side of the Tyson complex is the wye that connects the former Nebraska Northeastern/BN/CB&Q/SCWR O'niel line to the Sioux City Sub. On December 1, 2012 the BNSF completed its repurchase of this line and its new subdivision name is not known at this time.



Passing through the old Ferry yard a northbound empty grain train passes the CNW Dakota City local.
Just to the north of the this wye is the old BN/CB&Q Ferry yard and engine terminal. In 1981 the BN replaced the original 1880's bridge over the Missouri River. Prior to this trains coming north would exchange the road power with a set of GP7's or GP9's to drag the train over to the Sioux City yard. The opposite would occur for southbound trains from Sioux City.

A SC-LIN train heads south through Ferry.
Soon after the opening of the new bridge the old engine terminal and yard was reconfigured with the engine terminal removed and the yard ladder tracks off the main removed with only two tracks surviving as storage tracks.
MWILKCK passes through Ferry NE.
From Ferry to Floyd the CNW and BN shared the trackage. The line was originally owned my the CNW and was The CStPM&O mainline until the line south of Pender NE was washed out in the 1930's. After that the line was a secondary line to Emerson and Norfolk NE. The line and bridge was sold to the BN in 1975 with the CNW retaining trackage rights and ownership of the sidings in South Sioux City, NE. The UP still retains these rights today.

An empty BN coaler heads through S. Sioux City on a frozen  morning.
To cross the Missouri River the sub encounters a short grade up to the level of the bridge. On the NE side this is an incline that starts at G st in South Sioux City and at Leech Ave in Sioux City. Once a northbound train starts the climb for the bridge they call the Sioux City yardmaster for instructions. If everything is going well they get to proceed into the yard.
Coming off the bridge at G st in S. Sioux City, IA..
Starting the climb to the Missouri River bridge in S. Sioux City, Ne.
For those trains that don't have space in the yard they are held at Leech Ave. Trains are also held at Leech Ave for new crews if they are to head up into South Dakota.
Holding on the hill at Leech Ave this loaded coaler is waiting for a spot to open in the yard.
Just to the north of Leech Ave is Floyd. This jct is where the UP accesses the Sioux City for the run to Ferry and the UP Dakota City Industrial lead. Floyd also is where trains from the South Dakota lines access the Sioux City Sub. Heading north from Floyd the sub curves around the old Milwaukee Road downtown yard on a track that was built in 1956. This new track allowed GN and CB&Q trains to interchange in the GN yard on Hwy 75 instead of the original GN yard in the stock  yard district.

An empty coaler heading south out of Sioux City.

Rolling out of the Sioux City yard past the MOW staging area.
At 6th st the cross-over for the yard is located. This cross-over allows for trains to use the new pass which is a by-pass track that was build along the west side of the yard in the mid 80's to allow coal and grain trains to roll through.

Doubling over its inbound train the Sioux Falls local passes the grain elevators just south of the Sioux City yard.
The BNSF yard is located on the west side of old Hwy 75 between 18th St and 31st St. The city opened a new under pass about 2 miles north of 31st St and since then the BNSF has been blocking this crossing for extending periods of time. The yard office and MOW departments share the old GN freight house located off of 18th St.This is a busy area and is BNSF property. One should not venture into the yard office area without an expectation of being confronted.

Railfaning the Sioux City Sub.
Though Hwy 77 parallels the line from Fremont to Sioux City the sub is often away from the road. The highway is the best to use when getting from one point to the next in a fairly quick time. To explore the line in depth the many country roads (paved and gravel) are the best way to railfan the sub. A word of caution, if you are not used to driving on gravel roads you should be cautious. Loose gravel is like ice for those that are not familiar with driving on it.For those that like to get off the pavement GPS and a Delorme map are your best friend.

The sub is controlled by TWC and due to this trains are given TWC from one of the 5 sidings to the next and told how many they will meet. AAR channel 75 (161.235) is used by tthe BNSF Dispatcher to communicate with the trains. The BNSF Sioux City yard is 160.680 and UP DS 20 is 160.740. The UP DS is called by when permission is need to cross the UP in Fremont.

Known trains along the line:

  • MKCKWIL/MKCKWIL - Kansas City to Wilmar, MN/Wilmar, MN to Kansas City
  • MLINWIL/MWILLIN - Lincoln, NE to Wilmar, MN/Wilmar, MN to Lincoln, NE
  • MLINSCX/MSCX/LIN - Lincoln, NE to Sioux City, IA/ Sioux City, IA to Lincoln, NE
  • MKCKDIL/MDILKCK - Kansas City to Dilworth/Dilworth to Kansas City

Along with these trains there are unit grain,ethanol,coal, cement, potash, and oil trains to keep the line busy.



Thursday, December 27, 2012

December Blair Sub Construction Update 21012

A week before Christmas I was able to get out and take a look at the construction progress on the Blair Sub. In short not much has taken place but there are a couple of items worth reporting.

Arlington, NE
The new double track bridge was cut in in late November. This involved replacing the current bridge with the construction of a new double track concrete deck bridge.

At the grain elevator in Arlington MOW crews were noted working with panel track sections. I do not know what they were doing or if these panels are going to be used in the area.

Kennard, NE
The biggest development is the relaying of the old Kennard siding as the second main track. This section was completely rebuilt and two new bridges were installed as part of this rebuild. The track had been laid and connected at the old West Kennard switch but had not been ballasted when I visited. Crews where noted moving ballast regulators and tampers into the spur on the west side of Kennard. Once this track is finished the line will be double tracked from CP Allen Creek to a mile east of California Jct, IA and then from CP Duffy on the southwest side of Blair to the west end of the old Kennard siding.

Fremont to Missouri Valley
From east Fremont, NE to Missouri Valley, IA no new work was noted. The new row that was created from west Kennard to the west side of Arlington is ready for ties and rail to be installed. The crossings that will receive flashers have had the new bases installed and signal boxes all wired for the installations.

A UP conductor was noted as indicating that the union announced that no new work would occur on the project until 2014. There was no indication that the current work would be finished in 2013 or if the project  will be dormant until 2014.

Spring weather and time will tell.

Monday, December 17, 2012

A cloudy Saturday

On Saturday, I was able to sneak away for a couple of hours to do some train watching making a circle from Omaha to Fremont to Missouri Valley and back to Omaha. This seems to be one of my  more permanent train watching patterns as I typically encounter a fair number of trains following this route.

During the overnight and Saturday morning we had our first rain in quite awhile.The 1/2 to 3/4 inches of rain made the back roads interesting to drive on later in the day while I was out on the Blair Sub. It also left the sky dark and full of heavy clouds. So making the best of it I converted the days images to black and white.

Heading out of Omaha, I didn't encounter any trains until the Dodge St/Hwy 6 over crossing near 144th where I spotted the tell end of a eastbound bare table. I was hoping that this wouldn't be the way the morning was going to go. By the time I got to Fremont I was really wondering if the day was going to be a bust as I hadn't encountered any trains until then. Just east of  Fremont while on old Hwy 275 I was greeted by the MNCCB heading toward Omaha behind UP 4935-2168-4721.

UP 6532 leads a train of company hoppers eb toward Fremont, NE.
Continuing on into town and crossing over the ex CNW yard on S. Bell st, I spotted a westbound booze train changing crews. I started to head over toward the BNSF/UP diamonds but noticed that the train had already started to head west so I drove over to Ridge rd to get a shot of the train with the town in the background. No sooner had I pulled up and an eastbound coal load of company hoppers starts blowing for the crossing. UP 6532-7255 DPU 6392 rolled out of the fog and misty low cloud to block my planned shot of the booze train. I was hoping that the booze train would slow down or stop but soon UP 5693-6189 rolled past me on the opposite side. Crap I hate it when that happens.

Coal loads and booze
Once the coal loads cleared the crossing I headed on up to Pappa siding on the BNSF to see if any southbound BNSF trains were holding while the UP trains cleared the diamonds. The siding was empty but the Fremont switch engine, BNSF 2828 was parked on the Frontier Grain spur.

With no action on the BNSF I headed back south and noticed a set of eastbound headlights on the UP from the N. Pierce st crossing. I pulled over and parked hoping to catch them as they pulled into town. After a couple of minutes the eastbound hadn't moved any closer to me so I started to head for the BNSF side of town.

Broken chatter on the scanner had a northbound BNSF train releasing the track warrant from Elk siding south to Ashland and BNSF 7356-6824 soon brought a north bound empty booze train across the diamonds.The radio chatter continued on the BNSF side with the dispatcher placing the northbound booze train into the siding at Pappa and moving a southbound from the siding at Elk down toYutan siding to meet another northbound out of Ashland who was to meet the southbound that the booze train sitting at Pappa is waiting for at Elk siding. Got that?

The BNSF was fairly busy but I wanted to check on the Blair sub double tracking and decided to head that way instead of chasing the BNSF. Before heading out of town I spotted the BNSF local power tied down west of the depot with BNSF 2809-2304 being the assigned power. Over at the UP depot the UP Fremont switcher power UP 517-833 were tied down in their usual spot.

Heading east and crossing over the ex CNW yard I noticed a green signal for a westbound to head off the Blair sub to the Columbus sub. While driving east on Morningside rd near the Fremont power plant, I spotted an westbound perishable with UP 8524-4111-7508 leading about 35 empty refers. As it went by me I also spotted a westbound mixed freight on the Omaha Sub. A quick u-turn was in order.


DPU 6757 passed the UP 4332 on the MCBNP.

Driving west on Morningside rd I spotted the eastbound train I had setup for earlier starting through town. UP 6510-6445 DPU 6757 had a NSPX coal load heading for Omaha and a run up the Sioux City sub to Minneapolis. I was able to catch the DPU passing a late MCBNP on the east side of Fremont. The tardy MCBNP had UP 4332-1976-8285 as power and was being held for the empty perishable.

With the back tracking done I headed back east out of town to Military Ave to follow the tracks over to the Elkhorn river.The overnight rain had turned this normally decent gravel road into a mess, ruts and soggy car tracks made for a fun drive. Gumbo really lets one know its time for new tires as I was spinning and sliding the whole time.

UP 6866 leads the MSSNP into Arlington.
No trains were spotted until Arlington where I encountered the MSSNP dropping down off of Arlington Hill on the east side of town. The MSSNP had the UP 6866-8139 DPU 6952 as power.


The next train I encountered was a westbound stack train between Arlington and Kennard. UP 8638-4759 DPU 7622 made good work of the climb up Arlington Hill. The train was mostly domestic containers with some maritime containers thrown in.

As I dropped down the hill on Hwy 30 into Kennard I spotted another westbound stack train with UP 7831-4526 DPU 5226-7524 as power. This train was made up of mostly maritime containers and may have been a Seattle bound train.

From Kennard to Council Bluffs I didn't encounter anymore trains which was unusual. At N. Council Bluffs the first coaler I had encountered in Fremont was holding at beanos for the MNPCH with UP 4346-8227-4975 to run around it.

While in Council Bluffs I was surprised to see that the CN/IC yard was empty. Saturday has been a day that the road train comes into CB but the road power was nowhere to be found. Scanner chatter did reveal that the CN Switch crew was out and over on the Omaha side.

Over in the UP Pool yard UP 536-511-512 were noted sitting in the middle of the yard. These units maybe the N. Omaha power as its unusual to see three GP38-2's together unless they are on this train. While checking these units out the NSPX train encountered at had pulled up to 9th street to wait for the two trains in front of it to head out of town. With nothing currently moving I headed over to get some gas and to check out the BNSF and IAIS.

The BNSF Island Park local was working at the S. Bartlett elevator putting its train of aboutr 5 cars together. Today's power was BNSF 9634-6797-3020 which was overkill for the amount of cars to be moved. The BNSF CB switcher is BNSF 8613 and she had about 25 cars tied on to her. These would be interchanged with the IAIS later in the evening.

The IAIS was quite. The CBBI was already made up and had two ES44AC's and a GP38-2 as power. With the opening of the new shop at Yocum the stored power has been slowly moving east. There was around 6-8 units still on the storage tracks though.

Before heading for home I headed back over to 9th Ave to catch an eastbound mixed freight. Power was UP 4104-8656-KCS 4615. Its unusual to see KCS power on the UP in this area so that was an interesting sight. The terminal yard master was giving the MCBDM permission to make a double over and to head out of town so I headed down to see what the power would be. A ratty GE was today's leader so I decided it was time to head for home.







Wednesday, November 14, 2012

South Central NE

It had been awhile since I really went out and did some exploring and while building a map of industrial locomotives I got the urge to get out and look for some industrial units close by. With my work schedule and always being on call every 3 weeks I don't have much free time but I had a spur of the moment idea to take the 9th off to explore.

I headed out the door a bit later than I had liked but was able to get to all the areas I wanted to before the day was over. Heading to Lincoln to head south for the first planned stop of Hallam, NE I made a detour over to Hwy 6 from I-80 to follow the BNSF into Havelock. \

Ashland was quite and I didn't see my first train until I was west of town about 3 miles. A westbound empty coaler was sitting at the cross overs between Ashland and Greenwood. Since it was just a couple of plain Jane ES44AC's for power I continued on west and was surprised to find a Habsco rail grinder in the house track at Greenwood. This train set has the two ex GE B30-7's as power units for the grinder cars and movement.

RMSX 1101 rail grinder at Greenwood NE
After a brief look around the train it was time to head westbound again. Next up was the MKCKWIL sitting in Waverly, NE and a westbound Maresk double stack stopped between Waverly and Havelock. I stopped to get shots of both because I typically do not get harassed while taking shots from Hwy 6.

MKCKWIL sitting on the main waiting for a new crew at Waverly, NE

BNSF 6712 leads a Maresk double stack sitting east of Havlock, NE
I caught the tail end of the "rush" hour traffic in Lincoln and just headed right on through town on Hwy 6 to Hwy 77 south. Driving over the BNSF yard I caught a glimpse of BNSF 9999 and a number of other units including some SD40-2 hump engines.

The first stop of was Hallam, NE at the NPPD power plant. NPPD has a GP38-2 as the switcher located at the power plant just north of town. This is also the end of the line for the old RI mainline north out of Fairbury NE. Unfortunately there was a coal train being unloaded and the unit was not visibly from the road. I'll have to check it out the next time I'm down in that area.

With Hallam being a bust I got back on Hwy 77 and headed for Beatrice, NE and the Alco that lives at the coop elevator. Relco 707 and SNCC 2004 are used to shuffle empty grain hoppers but today they were being serviced by a mobile Relco crew. SW7 SNCC 2004 was being worked on while I was there. Not sure what they were working on but the fireman side doors for the compressor where open and a guy was noted under the unit working near the air reservoir tanks.

SNCC 2004 and Relco 707 resting under a hazy dusty morning sky.
While finding my way down to the coop I stumbled across some rare surviving freight cars; B17/B24 aircraft wing cars. They are no longer on trucks but were fairly intact with the old Burlington Route herald still visible on one side of each of the cars. Both are sitting on cinder block foundations just east of the coop being used for sheds.

B17/B24 aircraft wind car used as a storage shed.
While two more have been incorporated into a warehouse at the Beatrice Scrap Shredder yard.

Beatrice Scrap Shredder warehouse.
Having found the first Alco of the day I took off for Plymouth NE for the next one on my mental list. RLCX 1051 an S-2 is assigned to the local coop and had just finished loading a grain train in the last day or two. The loads were sitting southwest of the coop waiting for the UP to come and drag them out of town.


My next stop was Jansen, NE. I wasn't really sure what would be found there as both Google Earth and Bing images of the area are of low quality. The images seem to show an Alco switcher on the north east side of the town but only a visual inspection would confirm this. Unfortunately the switcher was not to be found but a rather nice looking GP7 is used to shuffle around the grain cars. The thought of an Alco was nice but the sight of a GP7 in 2012 is also a nice one.

JLCX 101 resting in the mid morning sun in Jansen, NE
Having finished getting my shots and a frame number of the unit it was time to head down to Fairbury and to check out the town. On the agenda was to get a shot of the old RI division point depot/office which I was able to do, but I also tripped over a couple of other interesting items.Over on the UP main an old RI/CNW snowplow was sitting on a spur. This old RI plow was probably used in this area while working for the RI but in her painted CNW colors she looked out of place.

In the area between the RI depot and the road is a small park containing an ex RI gas electric and the ex CB&Q depot from Kesterson, NE. The gas electric is looking pretty rough and the old Q depot is in the grounds of the riding train that is east of the depot. 

ex CRIP gas electric stuff and mounted

ex CB&Q Kesterson NE depot
Fairbury was my turn around point though I wouldn't be going home the same direction I had came, so I continued to travel west to go east. After making the turn north on Hwy 81 at Hebron, NE I headed up to Carlton, NE to check out the Alco S-2 working at the elevator. 

The 'downtown" area of Carlton is south of Hwy 4 and I soon made my way from Hwy 4 down to the elevators only to be disappointed that the Alco was nowhere to be found. I did happen to notice that the new flood loader that had been built on the west side of town had a CN painted loco that needed to be checked out. I was able to drive up to the area where the unit was parked and got a semi distant shot of CGAX 6128. This unit appears to be an the ex IC 6128 but I could not get up close to check for frame numbers to confirm its heritage. The one item I noticed is the unit may have been deturboed and may now be an SD38-2.

CGAX 6128 at Carlton NE
After the side trip to Carlton I back tracked 6 miles to Hwy 81 for the next stop in Fairmont, NE. Before getting to Fairmont a stop in Geneva to grab a quick shot of the derelict ex GTW 0-8-0 that resides on the north side of town was in order. Its strange seeing this loco out in the open miles from active rail

Missing a lot of parts.
After this little diversion it was back on the road to Fairmont. I wanted to catch the GP10 that works the ethanol plant on the west side of Hwy 81 but was only able to catch a long distance glimpse. So I took off for the next objective; Manning Rail.

First unit I was able to get to was the Watco SW2 being prepped for interchange. Railserve was onsite installing alignment couplers and was about half way completed. A local stopped to talk to me and stated that they had to finish the job today so the unit can be moved to Birmingham, AL. Since it was already 2 pm I don't think they got it done in time.

WAMX 105 an SW1 repowered with a Cummins genset.
 After walking around and getting shots of the SW2, I walked over to its replacement unit. Manning Rail 4602 had been delivered in the last couple of weeks and was looking good in red and blue. Unfortunately the unit is positioned so that its a morning photo. Since I'm was about 2 hours from home I took the shots anyway.

Manning Rail 4602 at Fairmont, NE.
Since I had a 4 pm appointment back in Omaha it was time to leave. All in all it was a good trip even though two Alcos couldn't be found. 

Saturday, October 13, 2012

UP Blair Sub Construction update 10/12/12

Only a short update as work has pretty much stopped on the sub.

The bridge east of Arlington is still being built. The pre-stressed concrete deck sections has been brought in and are positioned on each side of the creek. The headers are also staged to be positioned for the sections of the deck.

At Kennard the new switch which will be the other half of the cross overs is being installed. This is about 100-150 feet west of the Linn St crossing. Once this switch is installed the double track should be extended to the end of the old West Kennard switch. That is if the super foamers proclamation in August is correct.

On the Iowa side the only work observed was a MOW crew working on the cross over switches west of Allen Creek. The third main is also now connected to the main on both ends. New signals have also been installed protecting all three tracks eastbound just east of Italy Ave.

Friday, October 12, 2012

BNSF Sioux City Sub south end

I took a chance today and set out to follow a train or two on the Sioux City sub. My prior luck with this goal had been decidedly unlucky but with the up tick of traffic on the sub I figured my luck would change.

I headed over to Ashland, NE to try and find a northbound Sioux City sub train to follow. While passing over the Creston Sub on old Hwy 6 east of Ashland, I noticed a grain train holding the main. As I got closer to the wye from the Sioux City to Creston Sub the power came into view. Two faded and grubby warbonnet units where found leading the empty grain train. I typically don't give these units much time as the paint on them is way past its prime, but with two of them as the only power I was up for a chase.

BNSF 685 heads north up the east leg of the wye to the Sioux City sub from the Creston  sub. The Omaha sub will be crossed in the process.
While waiting for the grain train to start heading north the scanner was active with chatter between the Lincoln power desk and BNSF 7317. Seems the windshield had developed a crack and was getting worse and the crew wasn't too happy about it. Thinking this was a southbound train off the Sioux City sub I parked over by the car wash to get a shot of it coming off the Sioux City sub and of the grain train heading north. But after about 5 minutes the signal turned green and the Sioux City sub DS was giving a track warrant to BNSF 685 to proceed from CTC Ashland to the north switch at Elk siding. So the chase was on.

Heading north through Ashland my goal was to get to Wann Rd and ahead of the train. Turning off Hwy 66 at CR B I noticed that the train wasn't ahead of me nor even close. Unfortunately Wann Rd was on the wrong side of the sun for any shots so I headed north looking for photo spots. It should be noted that this area is flat and pretty featureless outside of a couple of bridges and an old elevator at Big Sandy.

Rolling north through the harvested fields.
Finally getting to the sunny side of the tracks north of Big Sandy I setup at CR J out in the middle of nowhere to get a shot of the train running across the harvested fields. Figuring this might be my last shot for awhile I headed back to Wann Rd to head back north. Even with waiting for the train to pass and heading about 4 miles out of the way to Yutan Rd I was still able to catch up with the train at Yutan (about 7 miles away from the shot location).

Since BNSF 685's track warrant was only good to the north switch at Elk I was anticipating a meet at Elk with a southbound. Going through Leshara and crossing over the main about a mile south of Elk I noticed a southbound waiting in the siding at Elk. I setup at CR T and CR 7 to get my shots of both trains. BNSF 685 was coming at me out of the sun and I decided to see what I could do with the shot.

Back lit through Leshara.
BNSF 685 rolled on through Elk and soon I heard the DS give it a track warrant to Pappa (Fremont, NE). Figuring that it would get stabbed at the UP crossing in Fremont and then have to wait for a southbound at Pappa, I waited for the southbound coal empty to pass before heading over to Hwy 77 and north to Fremont.
BNSF 5875 leads a empty DEEX coaler out of Elk siding.
As luck would have it the UP cooperated with the BNSF and BNSF 685 got to roll right on through town to Pappa. The anticipated meet at Pappa was with a southbound empty coaler that was already waiting for the grain train. BNSF 685 released the track warrant from Elk to Pappa and was given a new one from north switch Pappa to the south switch at Oakland, NE. Decision time, do I keep going north or do I follow the southbound? Well the need to get rid of 20 ounces of coffee and to get some food made the decision for me.

After a stop at Burger King I headed back down to the area of the UP/BNSF diamond to wait for the southbound. The UP wasn't cooperating this time as the ZSKGR was given the green to run through the diamonds but the southbound didn't wait long.

BNSF 8917 crosses the UP at Fremont, NE.
No sooner does the ZSKGR clear the diamond and I hear the southbound blowing for the crossings to the north of the diamond. A quick run over to N M st and W 2nd St to get the southbound crossing the UP. As the train comes into view I see its another empty coaler. Two coalers back to back are fairly unusual on the Sioux City Sub. As the coaler sneaks through Fremont I head south to CR W and head toward the Platte river to get a shot. CR W ends at the railroad crossing and becomes a private community with lots of signs letting you know you are not welcome.

Running along the Platte.
From CR W it was a quick run over to Elk and LeShara to get a shot of the train running through Leshara. Before heading over to Valley, NE and back into Fremont.

Rolling through Leshara, NE.
Back in Fremont I headed back up to Pappa to see if another southbound had rolled into town but only found the BNSF Fremont switcher heading back into town after switching the industries on the north end of Fremont.
BNSF 2809 rolls through Pappa
BNSF 2809 ended my day on the BNSF but not my day of railfaning.